Fully Factory Finished Broxwood Windows and Doors

Broxwood has capacity to supply a full factory finish to all windows and doors sold in the UK. All windows and doors should be factory finished for many reasons, one of them being that all the components are finished prior to the window or door being assembled. This gives total protection all over; behind the glazing unit, behind hinges and in all joints. The timber has a moisture content of 13% when it is treated which gives a better bonding between wood and stain/paint. The treatment protects the product during construction and gives a better finish than if painted or stained on site.

Forget The D-I-Y, Ladder & Paintbrush

To stain or paint your new windows or doors is one of the trickiest jobs you can do. It takes a long time and requires a high degree of accuracy. On top of this you need the weather to be on your side. Buy the windows and doors ready painted or stained from Broxwood instead and enjoy the best, longest-lasting protection possible.

The timber Broxwood uses in windows and doors is dried to 13% moisture. After vacuum impregnation, the materials are again dried by a special process to remove remaining moisture. This is a major quality point that secures penetration and durability of final surface treatment. A further important fact is that research has found that the bonding between timber and the stain/paint is reduced by 30%, if the window or door is left unpainted in the open for 2 weeks.

Factory Stain, Paint or Aluminium Cladding in a Rainbow of Colours

Broxwood will spray stain or paint your windows and doors in any RAL-reference colour or surface finish you prefer. In many cases it is also possible to have different colours on inner and outer parts of the windows or doors. Factory stain or paint gives better protection as all parts are applied prior to assembly. Thus, there is protective coating in areas where a brush would not reach afterwards. The quality of finish is, quite simply, excellent.